The full tension splice that maintains the full ductility of the reinforcing bar.
Spplicetek is a parallel-threaded mechanical splicing system designed  for the connection of concrete reinforcing bars 16MM to 40MM.

Product features :
  • Designed and manufactured in compliance with ACI 318 ACI 349, ASME Sec III Div 2.No
  • No Reduction of the bar cross section area . full- Tension splice: Bar-Break under tensile load.
  • Easy installation, no torque wrench required. One standard coupler for all splicing requirements ( Standaree/ Position).
  • Couplers and threaded bars are protected by plastic caps.
  • Full traceability of material origin and production batch.
Benefits :
  • Provides Continuity of reinforcing bars.
  • Allows full ductile elongation of bars.
  • No staggering of splices bars required.
  • Practical alternative to lap splicing .
  • Solves bar congestion problems.
  • Shortens construction cycle time.
  • Reduces steel wastage.
  • Enables multiple re-use of formworks.

A3 Steps manufacturing Process

  1. Cutting
    The end of the reinforcing bar is sawn square


  2. Cold forging
    The sawn end of the reinforcing bar is then enlarged by cold forging process The core diameter of the bar is increased to a pre- determined diameter.


  3. Turning
    The rib of forged bar is removed by turning process for even surface.


  4. Threading
    Finally, the thread is mechanically cut onto the enlarged end of the bar
 

  
  
  
  
  
  
 
 
 
Email
Telephone